It's The Good And Bad About Ghost Autowatch Immobiliser
Autowatch Ghost Immobiliser
The well-known Ghost Immobiliser provides your vehicle with the most advanced security against key cloning, hacking and theft. This TASSA-verified system is undetectable by thieves and prevents your vehicle from starting.
This device is silent and uses buttons on the steering wheel, center console, and on the door panels of your vehicle. This allows you to create a unique PIN code that can be up to 20 characters that needs to be entered prior to the car can start.
Easy to install
additional hints is more important than ever that you protect your vehicle. With car crime increasing and cloning tools easily available, it's vital to take precautions. Our Autowatch Ghost immobiliser provides a discrete, effective and aftermarket solution to protect against key cloning and vehicle theft. It is virtually undetectable by thieves and operates via existing buttons in the steering wheel or door panels, as well as the central console. This allows users to create an individual disarm sequence like credit card numbers that must be entered before the vehicle is able to begin or leave. This makes the system almost impossible to spot and is also unaffected by jamming or spoofing devices as used with other systems on the market.
The installation of the Ghost unit is a highly specialised procedure that should only be carried out by an approved installer. The unit is carefully integrated into your vehicle's CAN bus network and is able to communicate directly with the ECU. The Ghost can be installed without altering the factory settings, and it is virtually impossible for thieves to evade the system by using signal boosters.
After the Ghost has been installed, you will need to use a different and more efficient disarming sequence in order to turn on your vehicle. Press the service button 5 times in 2 seconds, but ensure that you don't hold it for too long. The system will blink twice to signal that Transport Mode has been activated. This feature is ideal for classic, sports and luxury vehicles that require their security system to be temporarily disabled while transportation or during servicing.
Once Transport Mode has been activated the immobiliser will be disabled and cannot be reactivated by entering your PIN code again. This feature is great for those who would like to store their vehicles during the winter months to keep them from being stolen or to avoid having to pay higher insurance costs.
No key-fobs or LED indications to give away its location
The Ghost immobiliser guards your vehicle from thieves by pressing buttons on the dashboard or steering wheel. You can enter a pin code without being noticed before starting the engine. It protects against signal relay attacks, ECU swapping and key cloning. It also connects to a smartphone application to arm or disarm remotely. It's simple to install, and is able to be fitted in a wide variety of vehicles. It's also extremely discreet, and can be hidden in a hard-to reach location such as behind the dashboard or within the steering wheel trim.
It's a great option for cars with high performance because it can disable the ignition system of your vehicle if an incorrect pin code is entered, which will stop thieves from stealing your joy and pride. The device can also send an alert to your mobile when you've left the vehicle unattended in public areas, giving you peace of mind while you're away from your vehicle.
In contrast to other immobilisers, the Ghost does not require any additional fobs or LED indications and can be concealed easily in a hard-to-reach area in your vehicle. It is extremely resistant to detection because it communicates directly with the CAN data network of your vehicle. It also doesn't emit radio signals, so it's unnoticeable by RF scanners or signal jammers.
It is designed to be weatherproof and tamper-proof. It can also be able to withstand extreme temperatures. It's also impossible to tamper by cutting the wires or removing it. It's also unnoticeable by organised gangs of thieves who use diagnostics reading equipment to detect security systems. It's not affected by professional diagnostic equipment that analyzes the CAN data to determine whether there is or absence of a security system.
No circuit cuts
With no LED indications or key fobs that can reveal its location, the device is hidden within your vehicle, underneath the steering wheel or dashboard and uses buttons in your car to create a unique PIN code sequence that must be entered before the engine can be started. The criminal cannot leave the vehicle even when they have keys to your car because they do not know the correct code. ghost immobiliser problems does not transmit radio signals, which means that organised criminal gangs that use diagnostics reading devices will be unable to detect the device.
This advanced immobiliser, that is also TASSA-approved, can help you reduce your insurance costs. This is particularly relevant to vehicles that their owners have customised. It also prevents key theft and ECU switching, meaning that the only method for a criminal to take your pride and happiness is to tow it away.
ghost immobiliser for sale is completely quiet as it doesn't use buttons that are found on the dashboard or in the factory keys. It communicates with the ECU using the CAN data circuit which is completely silent and doesn't give any indication that it was installed. This means that thieves can't replace the ECU or install new key fobs to get your car to start.
If you ever forget your PIN code, our engineers provide you with an emergency reset for the device, which allows you to enter 'service mode'. This will allow the dealer or technician to temporarily start and drive your vehicle enabling them to carry out maintenance work, MOTs or valet parking without needing to enter the PIN code once more. After the technician has finished or you have collected the vehicle, enter the PIN code to exit the service mode.
No radio signals
The Ghost immobiliser, unlike many other security systems for cars is not dependent on alarm systems or key fobs to stop vehicles from beginning. It communicates with the vehicle's ECU, the CAN data circuit as well as other circuits to stop the engine starting. This makes it a discrete solution that isn't affected by key cloning or RF scanning techniques used by thieves to bypass other security devices. It can be combined with tracking devices to increase the safety of your vehicle. You will also receive alerts if there is any attempt to steal or alter the security of your vehicle.
The Autowatch Ghost, a TASSA certified device, is insurance approved, and offers an excellent level of security against key hacking as well as copying. It is controlled by an app for mobile devices and is secured to protect. It also comes with a secure emergency PIN code override. It's a quiet efficient and cost-effective way to safeguard your vehicle from theft.
However, the Ghost has its share of problems. A common issue is that users have difficulty to enter the correct disarm sequence. This is due to the fact that the device requires input through buttons that are already present in your vehicle, for example those on the steering wheel or center console. This isn't easy for drivers to remember, or they could make a mistake the first time around. It is best to read the user manual that comes with the device and practice the disarming procedure prior to driving.
Another issue is that some vehicles have problems with the CAN data connection, which could affect the functionality of the Ghost. This can be caused by defective sensors, or an abrasive OBD connector. It is recommended to test the system again prior to using it to determine if there are any issues with the CAN connection.
Change your PIN code quickly
The ghost is a great device and has taken the market by storm however the process of changing pin codes can be a bit confusing. The device is preprogrammed by installer at the time of installation, however customers may want to change it for various reasons. For example, they might prefer a different button that disarms the device or do not want their installer to know. It is also possible that they dislike the pin code they have. The good news is the switch to a new pin number is incredibly easy. Follow these easy steps to learn how.
Please note that you will need to turn off the ignition but do not start your car! This process will take only a few moments. The vehicle will then resume normal operation.